PET BOTTLE PREFORM INJECTION MOLDING MACHINE HDX208PET FOR SMALL VOLUME

 PET Bottle Preform Injection Machine and Accessories
Dehumidifying dryer and auto loader system for material.
Environment dehumidifying dryer system.
Chiller system.
Mold and hot runner temperature controller system.
Automatic system.   PET Bottle Preform Injection Machine Features
Special injection construction designed to benefit for plasticizing.
By means of linear potentiometer(L/P) for injection and clamping unit. Deviation is under 0.01mm.
By use of PID temperature controller, which has limitations for screw cold starts,broken wire  detection, temperature preservation, etc. Temperatures can be controlled by ±1°C.
Microprocessor controller with 4 stages injection, 3 stages holding pressure and 3 stages back pressure.
Shut-down memory is able to store up to 100 preset mold data memory.
Higher stability and lower defect in PET preform dimension.   HDX208 Pet Bottle Preform Injection MachineParameter,    

ITEM		UNIT	DATA
Injection Unit	Screw Diameter	mm	50	55
	Screw L/D Ratio	L/D	24	24
	Injection Volume	cm3	461	558
	Shot Weight(PVC)	g	553	669
	Injection Pressure	Mpa	170	141
Clamping Unit	Clamping Force	KN	2080
	Opening Stroke	mm	475
	Mould Thickness(Min-Max)	mm	200-520
	Space Between Tie-Bars	mm	515×515
	Ejector Force	KN	62
	Ejector Stroke	mm	165
General	Motor Power	KW	22
	Heater	KW	18.5
	Pump Pressure	Mpa	16
	Machine Dimension	m	5.9×1.4×2.3
	Machine Weight	T	6.75
	Mould Orientation Ring Diameter	mm	Φ160
	Nozzle Radius	mm	SR15

             

Contact us if you need more details on Pet Bottle Injection Molding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Water for Injections Machine、Pet Preform Injection Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : PET Preform Injection Machine