16Cavity Hot Runner Injection Mold/PET Preform Mold
Basic Info
Model No.: 16Cavity
Product Description
2.Cavity:Single/Multi
3.Runner:Hot/Cold
4.Type:Air seal/short tail/long tail
5.One million Grantue
16Cavity Hot Runner Injection Mold MOULD DATA
NO.of cavity | 12cav. | 16cav. | 24cav. | 32cav. | 48cav. | 72cav. |
18g(cm) | 62*38*43 | 79*38*43 | 88*46*45 | 86*68*48 | 105*68*55 | 110*78*58 |
Weight(kg) | 630 | 810 | 1150 | 1750 | 2450 | 3100 |
28g(cm) | 62*38*45 | 79*38*45 | 88*46*48 | 86*68*52 | 105*68*58 | 110*78*62 |
Weight(kg) | 660 | 850 | 1250 | 1900 | 2600 |
|
40g(cm) | 62*38*48 | 79*38*48 | 88*46*50 | 86*68*55 | 105*68*62 | 110*78*65 |
Weight(kg) | 690 | 890 | 1350 | 2000 | 2750 | 3000 |
PET Preform Mould Main Components Specification and Advantages | ||
Main component | Specification and Advantages | |
Core | 2316 steel from Sweden | high-quality special mould steel from sweden (HRC >45) gurantee 2 million shots without any maintenance |
Neck | S136 steel from Sweden, HRC >60, International standard screw neck | |
Cavity | 2316 steel from Sweden Each cavity have an independent temperature controller Each cavity self-clamp independently, ensure mould concentricity. 0.05-0.06mm | |
Body | P20 Steel material from Germany | |
Hot runner plate |
2344 Steel material from Germany
| |
Slider Plate | wear-resistant copper | |
specially designed cooling circuits | Proper design reduce molding cycle time to 15 seconds( with proper water chiller and Injection Machine) about 3-5 shots per minute | |
Hot runner design | make sure the high quality of preform products. | |
Heater | Anole Germany | |
valve gated design with Automatic drop | each cavity has its independent heating zone and temperature is measured by independent thermocouple. .(advantages: easily avoid some problems such as white or draw bench on bottom). Valve gated type without tail reduces labor force. | |
Precessed by high presion CNC machine and numerical control loathe machine | Lowest weight and dimensional variation thickness between max. part and min. part is not more than 0.05mm make sure that every parts can match well |
Product Categories : Preform Mold
Premium Related Products